Home » Archives for September 2012

Are You Sure Your Home is Safe from All Kinds of Danger?

A home is considered to be one of the most precious components of ones life. Without it a person would have nowhere to return to after a hard days work. So it is very important that ones home is always kept protected from both internal as well as external threats.

Today home security is becoming a rising concern for individuals because crime rate is rapidly increasing. Criminals are on the loose and they spend their time checking out the neighborhood for potential targets to break and enter into. The number of break-ins and robberies that have been reported has steadily been increasing.

People today are scared that their homes can be broken into and valuables stolen at any time. What is even worse is that since their home is not secured from danger, their family members are in a vulnerable position at all times.

Home security 300x199 Are You Sure Your Home is Safe from All Kinds of Danger?

Good home security system for peace of mind

Once an individual avails of a good home security system, he will be able to enjoy peace of mind at all times as his family members and valuables will be safe at all times. ADT home security system provide homes with multi-layered protection. The home security system consists of a security surveillance camera that monitors the perimeters of the house at all times. Motion sensors are installed at all entry points of the house as well as throughout the house.

Most burglars think of entering homes through the windows. Merely shutting the windows tight or locking them is not going to be enough to repel these intruders. However, when individuals avail of ADT home security systems, intruders will get caught as soon as they enter the house due to the presence of motion sensors present all throughout the house.

However, as soon as an intrusion is sensed an ear piercing alarm will be let out that immediately alert the individuals at home as well as the neighbors. In addition the police will also be immediately alerted about the intrusion and help will be dispatched right away.

ADT home security systems are made in such a way that they do not only protect individuals homes from external danger but from internal danger as well. ADT home security system safeguard homes from fire, carbon monoxide emissions and they monitor changes in temperature as well as floods.

In this way they help to ensure that the house is not destroyed due to internal factors. While one is away or busy fire could easily break out and spread all throughout the house and in the process destroy life and property. Carbon monoxide emissions could lead to death of members inside the home if undetected and ADT home security systems ensure that these emissions never go undetected.

Damage to property and household valuables could also occur due to floods but ADT home security systems provide 24/7 monitoring of home and immediately notify household members as well as the fire department as soon as any such changes are detected.

Once a person avails of ADT home security systems, they can rest assured that their home is safe from both internal as well as external dangers.

Authors Bio:

Dorothy Woodson is an outreach consultant for My Home Security Solutions Pvt Ltd, which is a leading security solutions provider. She has extensive knowledge about how one can protect their homes from external and internal dangers with home security equipments and she loves to share this information with her readers.

Via: Are You Sure Your Home is Safe from All Kinds of Danger?

Outdoor Gas Grills Essential Features and Uses

Outdoor gas grills are an essential part for your personal barbecue or an outdoor kitchen. These grills are fuelled by gas, which is a lot cheaper than charcoal and petroleum furnaces used for grilling.

Gas grills are way cheaper as well and environment friendly too. They do not produce harmful fumes and pollutants in the environment and are therefore a must have for any home. These grills are available in various versions and range starts from about nine hundred dollars.

There are some specified essential features which a gas grill must have. Whenever you go to buy a grill you should look for these features. An ideal outdoor grill should have the following features like:

High quality of construction
Life of brass burner
Stainless steel surface
Flame regulator and its control

Gas grills Outdoor Gas Grills Essential Features and Uses

Gas grills easy to use and maintain

Best gas grills are easy to maintain as well. It is like you can turn them on any moment and it will take only a few minutes to heat the grill up. These have the knob to regulate flame density and you can easily tune it as per your requirement.

These are ideal for cooking meat and vegetables completely without paying extra attention to the stuff while grilling. These are relevant for cooking red meat dishes as they need high flame but with different variability in every few minutes. Moreover these grills decrease your work load, as they facilitate easy and cleaner cooking procedures, which you can include in your daily cooking routine too.

Using outdoor gas grills is simpler than ever before

Using the natural gas grills is made simpler than ever before. Even a novice who does not know much about cooking can use them and can effectively cook best food for the family. You will simply love the way it works.

For using an outdoor gas grill, you need much more than a matchbox. Good weather is also very essential for the use of grills so as to make your working go smooth. There are usually three essential elements that are required for using a gas grill. These elements are spark, gas and oxygen.

The spark is usually produced by the igniter. This is a simple device that produces electricity just after a noise. The working of the igniter is quite simple. It contains a spring loaded hammer that hits a crystal inside the igniter. This produces noise and ultimately sparks which is sufficient to light the gas in the grill.

The burner is designed in such a manner that it can mix the gas and oxygen and spread it all over the area. This helps in spreading the heat equally over the whole cooking area and cooks your food faster than any other method. You will also find a pair of electrodes on every burner that are linked to the igniter. This heats the burner quickly and evenly so that your food is cooked delicious.

You can also go for grill smokers that are just perfect for your outdoor kitchen. It allows you to use grilling and smoking simultaneously. Grill smokers produce smoke that comes out from the attachment fastened to the grill. Many best gas grills coming today are potable and are just perfect for camping trips. These grills are easy to use and easy to handle. The best thing about these grills is that it provides delicious flavor to your food.

Via: Outdoor Gas Grills Essential Features and Uses

Eco-Friendly Ways to Increase the Value of Your Property

Even if you arent planning to sell any time soon, knowing that youve increased the value of your property can offer you a great deal of peace of mind. When you increase your property value by making your home more eco-friendly, youll also feel good about your contribution to keeping our environment healthy.

Alterations to make your home more green dont have to be overly challenging or expensive. Not only will your family benefit from these changes, you will be thrilled by the value of your property when you are ready to sell.

1. Install an environmentally friendly heating and air conditioning system

Do you ever stagger when you see your power bill? Heating and cooling your home costs money and also uses up important fuels. When you choose a more efficient HVAC system, such as current Energy Star models, you could see major reductions in both your power bill and your natural gas bill if you have one.

Increase the Value of Your Property Eco Friendly Ways to Increase the Value of Your Property

2. Seal up your home

Having an energy-efficient heating and cooling system is a good start, but if your heat or cold air are going right out the window, its not going to help. Check your windows and the seals around your doors to make sure that there are no gaps. One trick for checking this is to hold a candle close to the seals and see if any encroaching air causes the flame to flicker. Check around your baseboards and the junctions of your corners as well.

In addition to checking for potential leaks, make sure that your home is properly insulated. Poor insulation will cause heat and cold air to leave right through the walls. Look for environmentally friendly insulation materials like cellulose or spray-in material that doesnt contain formaldehyde.

3. Add eco-friendly features to the yard

Your yard also contributes to the total property value. You can increase the worth of your yard by landscaping with native plants. Installing a drip system for watering the lawn and garden will increase your value while helping to conserve water.

Use environmentally friendly materials such as composites to build your deck, fence or gazebo. Avoid treating your lawn with dangerous chemicals or other toxins, which can leach into the water supply.

4. Consider solar panels

While solar panels may initially seem expensive, they will quickly pay for themselves. Instead of paying the power company for your electricity, you will be able to harness it directly from the sun and cut your costs considerably.

Solar powered water heaters and other appliances are also available now to make the switch easier than ever. A dedicated do-it-yourselfer can install solar panels themselves to save even more money.

5. Check your wiring and plumbing

In addition to creating a safety hazard, poor wiring and shoddy plumbing will cause your homes value to plummet.

Wiring issues pose a fire hazard, and leaking plumbing can create a serious mold problem in your walls, which can make your family sick. Hire a contractor to come out and check these systems for problems and follow any recommendations for repairs.

6. Update your kitchen

Most home-improvement gurus agree that an updated and modern kitchen is one of the strongest selling points in any home and will cause a substantial uptick in your property value. Some of the eco-friendly changes you can make in the kitchen include:

Replacing worn-out cabinets with cabinets made from sustainable materials
Installing low-flow faucets to cut back on water use
Switching out your old refrigerator, dishwasher and stove with updated energy efficient models
Installing sustainable, eco-friendly flooring like bamboo, which also makes for attractive cutting boards and back splashes
Using natural lighting as much as possible and replacing old lighting fixtures with compact fluorescents

Author Bio:

Alex is a plumbing and HVAC industry blogger who enjoys writing about DIY home improvement, energy efficiency, and eco-friendly lifestyles. He is the in-house blogger for McKee Homes, Fayettville NCs first choice for quality home.

Via: Eco-Friendly Ways to Increase the Value of Your Property

How to Get Repaired Kitchen Plumbing Problems?

Most of kitchen plumbing problems are minor. Certain most common issues occur in the kitchen include a loose pipe, a leaking tap and an overloaded drain trap. Since these are minor problems, calling a plumber can be costly and time consuming. If you know how to repair these minor kitchen plumbing issues, then you can avoid plumber expenses.

Determine the problem

First check and find out where the problem is. Drippage in two-control tap might be having issue inside the faucet housing, and may its washer have worn down. Washers are used to avoid drippage by keeping the metal closeoff valve inside the tap sealed. If it is a leakage under the sink, then switch the water on and look for a loose pipe.

Sometimes, the drain faucet beneath the sink may cause problems when clogs form there. Drain trap is a U-shaped tube extending from the sink to the wall.

Kitchen Plumbing How to Get Repaired Kitchen Plumbing Problems?

Stop the tap water supply

When you have determined the real problem, switch off the tap water supply. You can see the two closeoff valves either at the ground or near the sink that controls the water flow to the tap. Two closeoff valves are used for hot and cold water supply respectively. Switch on the tap using handles to drain out any remaining water. Now, you can work on the tap. It is recommended to change washers and make the pipes tighter at the same time.

Change the faucet controls

Use a crescent wrench to move out one of the tap valve stem. The stem will look a little similar of a spark plug and includes a washer. Washer is fixed at the bottom of the stem and you need to unscrew the washer. It is available in different sizes and so, purchasing one or two of the correct size will be easier if you take it to the hardware shop.

Tighten the new washer to the bottom of the stem. Enclose a small piece of thread seal tape on the threads of the stem and tight the stem back to the valve. Turn on the control and repeat the procedure for the remaining one.

Fasten the nuts

Employ a wrench to fasten the nuts that control the hot and cold water supply line to the beneath of the tap that access them under the sink. Generally supply lines are made of flexible tubing with a threaded nut on both ends. Once you have fastened the nuts, discharge water and look for leaks. If you find any leak, then use thread seal tape to the threads. Even after the leak continues, bring the flexible tubing to hardware shop and buy a replacement.

Loosen the big nuts

Loose the big nuts that control the drain trap in place. It is a U-shaped pipe at the bottom of the sink and is the main area for clogs. Pull the pipe off in a smooth manner and clean it out. Change the drain trap pipe and put some thread seal tape to the threads. Also examine the remaining drainage pipes to ensure that they are firmly held in place. Switch on the water, and your project is completed!!

Via: How to Get Repaired Kitchen Plumbing Problems?

Why You Need Evaporative Cooling for Your Home or Office

With inflation and power shortages going in sync, the era of having cheap electricity is fast becoming a myth. Governments all over the world are refusing to subsidize Petrol, Diesel and Coal, and the increasing price of crude oil is forcing energy companies and corporations to pass on the buck to consumers.

Our civilization is at a critical stage, where the combustible energy we have depended upon since the industrial revolution, is coming to an end in the absence of a cheap infinite source of renewable energy. In this juncture, consumers have no choice but to pay through their nose or opt for a more energy efficient way of living.

HONEYWELL Portable Evaporative Air Cooler Why You Need Evaporative Cooling for Your Home or Office

Govt. subsidies and encouragement

Energy saving is the in-thing these days. Oil and energy companies, at the moment, are heavily investing on green and renewable sources of energy. Major energy consumers like USA, European Union, India, China, Australia and United Kingdom are encouraging their citizens to adopt more energy efficient ways of living.

They are also subsidizing energy efficient products and solar energy. One of the best possible ways of saving energy is designing a building in such a way that it consumes less units and volume of energy. Leadership in Energy and Environmental Design(LEED), the premier agency energy conservation, provides a rating systems and guidelines for the design, construction and operation of high performancegreen buildings, homes and neighborhoods. It has overseen over 7,000 cases in about 30 countries since its inception in 1998.

The method of evaporative cooling

Evaporative cooling is the one of the oldest and cheapest means of effectively cooling in a large office, school, warehouse, factory or even your home. In comparison to air-conditioners, it consumes less unit of electricity per hour, and is also environment friendly and easy to install. It produces fresh, clean, and moist air for your home or office with minimum CO2 (carbon dioxide) emissions. And the best thing about evaporative cooling is that you can keep your windows and doors open.

These units cool the airs evaporative elements, and are very effective and efficient when used properly, but it cant be used everywhere. The evaporative process used by these cooling units is best suited for hot, dry and humid climates. These coolers are mostly in use in south-west region of USA, Australia and India. In such climate, an evaporative cooler can be the most effective and efficient means of climate control.

Cool Your Sojourn with Evaporative Cooling

In a dry climate, the temperature of a building can be minimized and marginalized to a great extent in parity with the comfort of its occupants by phase transition of liquid water to water vapor, which can cool the air using much lesser energy than the mode of refrigeration. In regions which are extremely dry or arid, the process of evaporative cooling inculcates an auxiliary advantage of air conditioning.

It distills more moisture for the convenience and comfort of the occupants of the building. It is not like a closed-cycle refrigeration system, and seriously demands a perennial water source in order to operate. That is the only drawback of this technology. But, in the long run it will save you lots of money in electricity bills.

About:

This article is written by Belinda who is currently working with http://www.coldflow.net.au. The company deals in air conditioning and evaporative cooling services for home and offices.

Via: Why You Need Evaporative Cooling for Your Home or Office

How to Redo Bathroom Plumbing Problems?

Are you having an old style, rusted bathroom? Do you want to make a rejuvenation of the entire bathroom ambiance? Well-designed and efficient bathroom plumbing guarantees proper working of each and every fixture in the bathroom including bathtub, sink and toilet.

You are provided with a bathroom of no clogs, leaks and faults!! Generally in most bathrooms, the plumbing is made near the sink and toilet in a visible manner and might have kept the pipes behind the wall or under the floor. When redoing this old bathroom plumbing, you will be able to improve its ambiance as well as function.

You can choose copper, PVC or plastic pipes, based on your tastes and the ambiance of your old bathroom in order to redo the bathroom plumbing. No doubt, this will spark a great idea in your brain.

Bathroom Plumbing1 How to Redo Bathroom Plumbing Problems?

Here we give a brief idea on how to redo bathroom plumbing in a stylish manner.

Switch off the value at the ground of the toilet plumbing counterclockwise, till it gets tightened. Place the wrench over the nut on the toilets supply line, keep it above the valve. Switch the nut counterclockwise to make less tight and loose the nut.

Position the wrench over the nut placed on the ground of the toilets tank. Turn the nut with low speed in counterclockwise manner to free the pipe, till it gets out fully. Keep this old pipe aside and throw away.

Set one end of the replacement piping around the point on the top of the valve, and turn it in clockwise direction till it gets tightened. Place the other end of the pipe on the spot at the underneath of the tank and move clockwise manner to make it tight.

Insert a decorative silver or bronze pipe cover around the base of replacement pipe. Switch on the valve at the ground of the toilet and check whether there are any drips or leaks. Make the nut or valve tighten to avoid leakage.

Switch the valve at the ground of the sink clockwise manner to make it tighter in order to stop supply of water when you make repairing.

Place a clean, dry towel under the bathroom sink and also those areas where plumbing lines are placed.

Make the supply lines at the sink valve in clockwise manner through a wrench to make it loosen. Place a wrench on the nut at each joint with the pipe and switch it counterclockwise manner to loosen the supply lines. Firmly hold the supply lines and pull these loosen from the sink. Keep these pipes aside to throw away.

Place the ends of new supply lines on the valves and fasten the nuts by switching them in clockwise manner through a wrench. Fix the other ends of the supply lines on the joints on the pipes for the cold and hot water supply. Switch the nuts in clockwise manner through a wrench.

Switch the valve at the ground of the sink to check for leaks or drips, and fasten if needed. Move out the towel before using the sink.

Hopefully these bathroom plumbing ideas can help you in assisting the problems associated with your bathroom and plumbing. Feel free to share more ideas in the comment box below.

Via: How to Redo Bathroom Plumbing Problems?

Tiny Transportable Humidifier/Aroma Diffuser For Your Traveling Requirements

Fogring 1 Tiny Portable Humidifier/Aroma Diffuser For Your Traveling Needs

Working with the current surrounding details to compose new and ingenious technologies, designers can upgrade our lives with just a few nicely -appointed touches. Consider as case in point this donut- shaped sub-miniature humidifier that floats on water – it addresses our issue of generally staying surrounded by a comfortable, well balanced atmosphere wherever we are. Weighing only 35 grams, the Fogring water -floating mini aroma diffuser and humidifier lacks the normal mounted water tank – it basically wants any form of container stuffed with h2o to do its work. Straightforward to connect by means of USB or drawing power from a battery pack, the Fogring is excellent for traveling. Available in different colors, the portable humidifier helps prevent the propagation of germs, is effortless to clear and can also be employed as an aroma diffuser. Test out the video beneath to see how the very small humidifier works and enable us know what you feel – are you fired up about this tiny gadget?

Fogring 2 Tiny Portable Humidifier/Aroma Diffuser For Your Traveling Needs